3-tri(propan-2-yloxy)silylpropyl 2-methylprop-2-enoate - Names and Identifiers
3-tri(propan-2-yloxy)silylpropyl 2-methylprop-2-enoate - Physico-chemical Properties
Molecular Formula | C16H32O5Si
|
Molar Mass | 332.51 |
Density | 0,942 g/cm3 |
Boling Point | 348.7±25.0 °C(Predicted) |
Flash Point | >60°C (>140°F) |
Vapor Presure | 0mmHg at 25°C |
Specific Gravity | 0.942 |
Storage Condition | below 5° C |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | 1.4234 |
3-tri(propan-2-yloxy)silylpropyl 2-methylprop-2-enoate - Risk and Safety
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
TSCA | Yes |
3-tri(propan-2-yloxy)silylpropyl 2-methylprop-2-enoate - Introduction
3-[tris (1-methyllethoxy) silyl]propyl methacrylate is an organosilicon compound, referred to as TMSPMA. It has the following properties:
1. Appearance: TMSPMA is a colorless to yellowish transparent liquid.
2. Solubility: TMSPMA is soluble in a variety of organic solvents, such as alcohols, ketones and esters.
3. Stability: TMSPMA is stable under conventional storage conditions and has a long shelf life.
The main uses of TMSPMA include:
1. initiator: TMSPMA can be used as one of the photosensitive monomers for the preparation of light-curable polymer materials, such as light-curable adhesives, light-curable coatings, etc.
2. functional adhesive: TMSPMA can be used as an important adhesive component, providing excellent adhesive performance and durability, often used in electronic devices, optical devices and coating materials and other fields.
3. Surface modifier: TMSPMA can be used as a surfactant to chemically react with the surface of inorganic or organic particles to improve the compatibility and quality of particles and matrix materials.
TMSPMA is generally prepared by reacting 3-(chloromethyl) propyltrimethoxysilane and methacrylate under appropriate conditions.
When using and storing TMSPMA, you need to pay attention to the following safety information:
1. Avoid contact: TMSPMA is irritating and direct contact with skin, eyes and respiratory tract should be avoided. Wear appropriate protective equipment such as gloves, goggles and protective masks during operation.
2. ventilation conditions: operation to ensure good ventilation conditions, avoid harmful vapor accumulation.
3. storage conditions: TMSPMA should be stored in a dry, cool, ventilated place, away from open flame and heat source.
4. Waste disposal: TMSPMA after use should be properly disposed of in accordance with local regulations and should not be dumped or discharged at will.
Last Update:2024-04-09 21:21:28